Description

Some customers have reported that they see their internal lights flash briefly when their water pump turns off. This affects the  dimmable 12V lights in the vehicle and does not always occur on every pump stop event. This effect can be just an annoyance but some people find it disturbs others in the vehicle.

The problem is caused by electrical spikes from the pump getting into the Sargent control system and tricking it into thinking that the lights should be on. This pump noise and the amount that gets into the Sargent control system varies with things like humidity, temperature, pump load and general component tolerances so is not present on every pump operation or every vehicle. On a technical level, these spikes are considered undesirable and could be large enough to cause premature failure of the Sargent system.

We have used our electronics expertise to develop a simple, plug-in solution to solve this problem. We have worked with one of the largest dealer in the South West who have had this problem on many of their new caravans and motorhomes. There seems to be no after market solution being provided by Swift or Sargent for this problem.

Our filter is a simple and effective way to solve this problem and can be fitted in under a minute. It has the same connectors as the original pump so no tools or wiring is required. This makes it easy to fit by dealers, engineers or owners alike.

Fitting instructions:-

1. Locate the inboard pump (Usually SUREflo or Flojet)
2. Find the electrical connector from the pump to the main loom
3. Separate the two connectors
4. Plug the pump into one end of the Apuljack Pump Filter
5. Plug the wiring loom into the other end of the Apuljack Pump Filter

The unit requires no further adjustment, is maintenance free and comes with a 2 year warranty