Replacement meter commonly found in Schaudt Electroblok / EBL / Control panel water / volt meters for IT type Control Panels.

If your meter is not working properly or the backlight comes on but the needle does not move then this is the item you need. These meters are Red/Green/Blue with a Blue background – if you require
Red/Grey/Blue with a Black background then see our other listing here.

These meters are very simple to fit. They do require some soldering but it is very simple and only involved 2 joints. Simply unsolder the old meter, unbolt from the front panel, refit the new panel and solder the two wires back on. Please feel free to contact us if you need any further advice on doing this. 

Note:
If you have an older panel with a volt meter that starts at 6V then
this meter is not a direct replacement. If you have one of these meters
then you need the alternative type of meter<HERE>.