Description

Replacement fuse holder to fit the 32mm fuses used on units such as the PMS3 and PMS5. The original fuse holder needs a screwdriver to open, which often causes damage. These are an upgraded part that can be easily opened using only your fingers. 10A rated. Retaining nut supplied

Found on the PMS3 vertical and horizontal charging unit

Fits 13mm hole with or without flats. Distance across flats 11.5mm. Depth behind front of panel 32mm

Fitting Instructions:

• In order to fit these you need to de-rivet the case and ensure none of the wires are pulled off.
• Using a large soldering iron, desolder the old fuse holders and remove them.
• To fit the new ones, insert from the front and screw on the supplied retaining nut.
• Solder the new fuse holder connections back to the existing internal wiring.
• Rivet the case back together